Siemens NX is the leading CAD / CAM / CAE system built on the best technologies for creating products of any complexity. The main task of the system is ultimately to reduce the cost of creating a product, improve its quality and shorten the time to market. This enables companies to quickly return the investment spent on the purchase and implementation of Unigraphics. In Russia, Unigraphics occupies a strong position, thanks to the wide possibilities of using the system in various fields of industry (aerospace, engine building, automotive, mechanical engineering, etc.) and the use of modern technologies that provide the user with advanced MCAD solutions at all stages of product creation. The success of the Unigraphics system in the Russian market is confirmed by an extensive user base,

System requirements : Win7 / 8.1 / 10 64-bit
Java RE 8 u45 64-bit minimum
Processor with SSSE3 support
AMD:
Bobcat
Bulldozer
Piledriver
Intel:
Xeon 5100 Series
Xeon 5300 Series
Xeon 3000 Series
Core 2 Duo
Core 2 Extreme
Core 2 Quad
Core i7
Core i5
Core i3
Pentium Dual Core
Celeron 4xx Sequence Conroe-L
Celeron Dual Core E1200
Celeron M 500 series
Atom
processors without SSSE3 ARE NOT SUPPORTED!


Files saved in NX-1980 Series (NX-1980 and above) cannot be opened in NX-1953 Series and lower versions of NX
NX version designation table after NX-12
NX-1847 Series: 1847-1851-1855-1859-1863-1867.xxxx
NX-1872 Series: 1872-1876-1880-1884-1888-1893.xxxx
NX-1899 Series: 1899-1903-1907-1911-1915-1919.xxxx
NX-1926 Series: 1926-1930-1934-1938-1942-1946.xxxx
NX-1953 Series: 1953-1957-1961-1965-1969-1973.xxxx
NX-1980 Series: 1980-1984-1988-1992-2000-2000.xxxx

picYear / Release Date : 2021
Version : NX 2000 Build 3101
Developer : Siemens PLM Software
Bit depth : 64bit
Interface language : Multilingual (Russian is present)
Tablet : Present (TeAM SolidSQUAD-SSQ)
Add. Information : The release provides both a complete installation from scratch (Siemens.NX.2000.3101.Full.Win64.Setup.iso) and only update Siemens.NX.2000.3101.Win64.Update.Only.iso to update any previous build of NX-1980 Series up to NX-2000.3101

What News?
Read: NX_1980_Series_Release_Notes_2000.pdf

www.plm.automation.siemens.com