PowerInspect powerful software company Autodesk with previous ownership Delcam for industrial inspection and measurement parts. With this measure the most complex shapes easily be possible. The program allows the measurement of a variety of embedded and will cover all your needs. PowerInspect In addition to measuring and planning related devices where the devices can be a very good CMM assessment and inspection of parts and hardware that is controlled by OMV devices. Using the ViewCube from all sides just to see the sights. With just a few clicks you can get in the program and reports to the different storage formats. Features and PowerInspect:
-Software to work with CNC CMM inspection and investigation machinery
-The use of a common interface for a range of devices CMM
-Non-contact measurement and laser scanning
-Built-in graphical programming strategies and parametric
-Very good compatibility with other Autodesk products
-Measurement of parts and complex shapes with different algorithms
-Import points from other CAD software
-The possibility of automating the measurement process
-Part of a complex configuration with a high degree of freedom
-Combined with the design and manufacture of measurement systems

System Requirements:
OS:
-Microsoft® Windows® 7 Service Pack 1 (64-bit)
-Microsoft® Windows® 8.1 64-bit Pro or Enterprise
-Microsoft® Windows® 10 64-bit Pro, Enterprise, or Education
CPU:Multiple core 64-bit processor, such as AMD Phenom II or Intel Core i7
Memory:4 GB RAM minimum / 16 GB or more recommended for demanding parts
GPU:AMD and ATI graphics cards, such as Radeon and FireGL, are not supported. / For larger CAD files, a faster processor, more RAM, and a more powerful graphics card will give better performance.


Whats New:
PowerInspect 2020.1 update Release Notes:

Geometric inspection
-Displaying tolerances: Configure the Feature Probing dialog to display tolerances during manual probing. The Feature Probing dialog displays upper and lower tolerances for points, dimensions, angles, and certain unit vectors (such as the axis of a probed cylinder). For profile properties (such as circularity), the Feature Probing dialog displays the maximum tolerance only.

Add-ins
-Electrode Inspection add-in: Fixed an issue where the alignment occasionally was not used properly.

Metrology
-GD&T Bonus calculation: PowerInspect now recognizes the feature of size limits defined by the user.
-Constructing a datum reference for GD&T True Position: Added the ability to select an Axis feature for the secondary datum when the primary datum is an axis.

Point clouds
-Labels on a triangulated point cloud are now displayed when points are hidden.
-Renaming a Point Cloud item now works correctly and does not cause the recalculation of items using it.

Protocols
-Fixed a problem that caused PowerInspect to close unexpectedly when connecting to a CIMCORE Stinger device.
-Improved measurement performances when using a Hexagon RDS.
-Mitutoyo CNC I++ connection now does not cause the error report for generation of failed activation context.
-Fixed an issue where the EnableUser command was sent before the GoTo and SetProp commands.
-Fixed an issue that caused the I++ protocol to return the current CMM coordinates without any digits after a decimal separator. For when PowerInspect is configured to display a language that uses a decimal separator symbol other than period (.).
-Fixed an issue that caused PowerInspect to become unresponsive when configured to use the I++ protocol and attempts to execute a CNC move with the target location being the same as the current location.

General
-Fixed an issue where PowerInspect closed unexpectedly while closing a document.
-Fixed an issue where occasionally it was not possible to edit a circle using a constructed plane (point-vector) as reference plane.
-Fixed an issue where PowerInspect closed unexpectedly when Run All Items on the Simulate Program tab was pressed.
-The pitch parameter for Sections now is not always set to an integer number when some specific Locale settings are used.
-Fixed an issue where exporting workplanes with names containing a quote to Autodesk PowerMill using the Delta Transformation item caused PowerMill to return an error.
-Fixed an issue where occasionally the report indicated the wrong number of inspection points in Surface Inspection groups.
-Fixed an issue where the diameter of the calibration sphere was reported incorrectly when using comma separator.
-Fixed an issue where no sound was produced when measuring guided single points.
-No license is needed to run VirtualCMM.
-No licenses are needed to run PowerInspect DRO.
-Updated the copy of the PTB certification for PowerInspect 2020.