DS SIMULIA Abacus CAE Program complex of world level in the field of finite element calculations of the strength with which you can receive accurate and reliable solutions for the most complex linear and nonlinear engineering problems.

DS SIMULIA Tosca (Fluid / Structure)
TOSCA Fluid -packet geometry optimization using external solvers (Fluent, STAR-CCM +)
TOSCA Fluid is so far the only available system for topology optimization of channel flow problems. Starting from an initial design space, an optimized design of a flow channel is determined automatically by TOSCA Fluid. With only one CFD solver run an optimized structure with e.g. significantly reduced pressure drop or homogeneous flow is derived. This allows for the first time an economic topology optimization of industrial large scale flow applicatons.
Tosca Structure - package geometry optimization using third-party solvers (ANSYS, Abaqus, Permas, MSC.NASTRAN, NX.NASTRAN, MD.NASTRAN)
Tosca Structure is the market leading technology for structural optimization based on industry standard FEA packages (ABAQUS, ANSYS, MSC NASTRAN). It allows for rapid and reliable design of lightweight, rigid and durable components and systems. Using topology optimization with Tosca Structure.topology you obtain optimal design proposals already during design concept. Specific detail improvements through shape and bead optimization respectively (with Tosca Structure.shape and Tosca Structure.bead respectively) make your designs ready for production. With Tosca Structure.sizing you find optimized sheet thicknesses even for large scale applications with up to millions of design variables. The result are designs with optimum relation between weight, stiffness and dynamic behavior.
DS SIMULIA FE-safe
Modeling package designs fatigue
FE-safe is the technical leader in fatigue analysis software for Finite Element models. FE-safe has been developed continuously since the early 1990's in collaboration with industry to ensure that it continues to set the benchmark for fatigue analysis software.
FE-safe was the first commercially available fatigue analysis software to focus on modern multiaxial strain based fatigue methods. FE-safe provides unique capabilities for thermo-mechanical fatigue and creep-fatigue, the fatigue analysis of composite and rubber materials and the Verity Structural Stress method for welded joints.
FE-safe is renowned for its accuracy, speed, comprehensive capabilities and ease of use.
Regardless of the complexity of your fatigue analysis,
FE-safe fits smoothly into your design process, enabling you to develop products that are designed for durability.
FE-safe offers the user an easy-to-use fatigue analysis suite that provides reliable, accurate fatigue life predictions regardless of the complexity of your analysis


DS SIMULIA Isight
SIMULIA provides users with leading solutions, to achieve maximum efficiency in the use of various software packages. Isight and SIMULIA Execution Engine (formerly called Fiper) allows to combine multiple models and multidisciplinary applications in flow simulation processes automate their performance in distributed computing resources to explore the resulting design space and to identify the optimal design parameters in accordance with requirements and limitations.
The ability of our proven solutions to automate and optimize the simulation:
Radical reduction of design time by integrating workflows into an automated environment
Issue a more reliable, high-quality products thanks to the reduction of terms of consideration of project alternatives
Reducing the volume of investments in hardware by leveraging existing systems and the distribution of work
Effective communication through sturdy sootrudnichestvu partners in the design
Key features Isight
Building a model
Sets of files Kits of files (File Set) represent a new and improved method for determination of dynamic arrays incoming and outgoing files.
They allow for the configuration file sets by determining the location of the file and file compliance scheme.
array file size is determined at run time, and each time can vary.
The contents of a set of files can be sorted by name (in alphabetical order) or by Date Modified.
Replacing keyword Jobid new keyword {jobid} corresponds to the current job identifier Jobid in Isight.
Replacing the keyword {jobid} made in the file properties and components.
Replacing the keyword New keyword User {user} - is the name of the user who started the task in standalone mode in Isight.
In previous versions of the keyword {user} has been available only in SEE.
Component Enhancements
Component CATIA V5 Additional support Isight parameterization number of layers of the layered composite material. Allowable values ​​are integers greater than 0. The order of elements in the array corresponds to the order of layers, laid down in CATIA.
Additional support in Isight parameterization layers of composite material and guidelines.
Allowable values ​​of the angle of orientation of fibers in the layer Isight correspond to the values ​​set in the CATIA model.
Parameters are now completely stored in the transition from Isight in CATIA and back.
Component ANSYS Workbench development environment component ANSYS Workbench development environment has been improved and now supports geometric conjugation. When importing file geometric data (e.g., CATIA V5) model in ANSYS Workbench (* .wbpj) and establishing design parameters with reference to the geometric parameters can update these parameters with the interface component through the geometric conjugacy.
To support this function, ANSYS Workbench parameters of the new files are created automatically by the component.
Runtime Gateway Visuals
Correlation Table The new visual correlation table displays a heat map of the correlation values ​​between the selected inbound and outbound parameters. In addition, the table helps users quickly identify highly correlated pairs of incoming and outgoing parameters. Finally, it displays the same data as in the correlation map, but they are presented in a different form.
Lines of minimum / maximum values ​​in the table of historical data in the historical data table row gray minimum / maximum values ​​have been added, in which the parameter values ​​are displayed as part of a series of values ​​of a given column. The data in the row is updated in real time as you complete simflow programs and adding new data to the table.
Improvement on the basis of data graphs In previous releases Isight could not create graphs based on the data from two different arrays.
Now Isight support graphics, which are used to create the data from two different arrays. For example, based on the relationship "displacement / time" and "power / time", the user can easily create a graph showing the relation "force / displacement".
This greatly simplifies the subsequent process of working of historical data arrays Abaqus component.
Tools for creating the license usage reports new utility that allows you to generate reports about the history of the use of Isight licenses.
It allows you to read data from the log on the license server logging Dassault Systemes (DSLS) or from the magazine FLEXnet debugging and custom report based on user preferences.
Data output to the standard output or ASCII-files of various formats (table, csv, json).


Year / Date of Release: 2019
Version: 2020 Build ID 2019_09_13-20.49.31 163,176
Developer: Dassault Systemes
Bit depth: 64bit
Language: English
Medicine: Present (TeAM SolidSQUAD-SSQ)
System requirements: Windows 7 / 8.1 / 10 64-bit


https://www.anonymz.com/?http://www.3ds.com/products-services/simulia/