CAM (Computer Aided Manufacturing) Works - module for creating control programs for CNC machines.
Programming of milling, turning, turning-milling and wire erosion by means of CAMWorks module.

* CAMWorks module allows you to create programs for milling, turning, turning, milling and wire erosion. The following types of machines are supported: Milling machines with simultaneous control of two? five axes;
* Turning single and double-spindle, with one or two calipers, with software-controlled auxiliary mechanisms (tailstocks, lunettes, safety catchers ...);

* Turning milling one- and two-spindle, with one or two calipers, with software-controlled auxiliary mechanisms, with simultaneous control of two? five axes;

* Erosive two- and four-axes.
The processing is performed directly in the Solid Edge environment and directly on the Solid Edge model. The results of the programmer's work are saved in the same model of the Solid Edge part or assembly. This ensures complete associativity of the model and tool paths, which leads to automatic updating of all tool paths during model changes. When you add any technological data to the Solid Edge, such as roughness, base, shape and surface tolerances, dimensional tolerances, the programmer-technologist always has direct access to them, which facilitates the choice of the scheme for basing the part on the machine and the selection of the necessary to ensure the specified quality of the tool part and cutting modes. The part can be easily adapted to the processing needs by, for example, eliminating unnecessary elements from the viewpoint of processing geometry or by recalculating the execution dimensions of the model in the middle of the tolerance field. In the Solid Edge workflow mode, you can perform joint processing of several parts, program the processing of a series of parts, or simply completely simulate the entire real situation on the machine table-all the rigging, preparation of any complexity, and so on-to take full advantage of the processing realities already at the earliest stages of creating a program



Year / Release Date: 2017
Version: 2018 SP0 (build 2017/1227)
Developer: Geometric Technologies, Inc.
Developer's site:

http://www.camworks.com/

Bit depth: 64bit
Language: Multilingual (Russian is present)
Tabletka: Present (TeAM SolidSQUAD-SSQ)
System requirements:
Preset:
Solid Edge ST9 MP04 (and above) 64-bit
Solid Edge ST10 MP00 (and above) 64-bit
Win7 / 8.1 / 10 64-bit
MS Access 2007 (32-bit only), 2010-2016 (32/64 bit)
Graphics 1024x768 resolution with minimum 32768 colors
Disk Space 10GB free
Memory 1GB + RAM (2GB recommended)