DFMPro (Design For Manufacturbility Professional) is an easy-to-use tool for testing the manufacturability of parts and assemblies for designers and process engineers integrated into the Siemens NX. Its use makes it easier to check the processability and identify parts of the project that can be labor-intensive or costly in manufacturing for turning, milling, turning and milling, sheet processing,


Express analysis of the workability of the part in terms of the possibilities and principles of milling or turning is carried out thanks to the DFMPro module. You simply select the type of part - milling or turning - and in a few seconds you will get a detailed report on possible processing problems. DFMPro will find all elements inaccessible to the mill that do not match the enterprise standards for the depth / diameter ratio or by belonging to the standard range of hole diameters, rounding of the outer edges and trihedral inner corners, holes that extend to the outer faces not perpendicular to them or intersect the internal cavities, and even Overestimated tolerance. For turning parts, grooves without fillets of internal diameter and all non-rounded circular edges will also be found. Numerical values ​​of the criteria for manufacturability can be changed in a wide range in accordance with the requirements of the enterprise.


DFMPro is used in the case of increased requirements for the system's ability to verify the workability of parts, as well as for the use of such tools in relation to turning-milling and sheet parts. This module performs more checks - and it checks not only the geometry of the part, but also customized attributes, for example, the brand of material - but also allows you to customize the analysis rules to a much wider range.


Year / Release Date: 2017
Version: v4.4.0 build 4444
Developer: Geometric Global
Developer's site:

http://www.geometricglobal.com/ 
http://dfmpro.geometricglobal.com

Bit depth: 32bit, 64bit
Language: English
Tabletka: Present (TeAM SolidSUAD-SSQ)
System requirements: Pre-installed NX 8.0-11.0 * Win 32 / 64bit (NX 11.0 is not officially supported, but can be used)