CAM (Computer Aided Manufacturing) Works is a module for creating control programs for CNC machines.


Programming of milling, turning, turning-milling and wire erosion processing means of the module CAMWorks.
* Module CAMWorks allows you to create programs for milling, turning, turning-milling and wire erosion processing. The following types of machines are supported: Milling with simultaneous control of two? five axles;
* Turning single and duplex, with one or two calipers, with software-controlled auxiliary mechanisms (tailstocks, lunettes, catchers parts ...);
* Turning and milling single- and duplex, with one or two calipers, with software-controlled auxiliary mechanisms, with simultaneous control of two? five axles;
* Erosional two-and four-axis.
Processing is carried out directly in the SolidWorks environment and directly on the model of SolidWorks. The results of the programmer are stored in the same model parts or assembly SolidWorks. This ensures complete associativity of the model and tool paths, which leads to automatic updating of all tool paths when making changes to the model. When adding any technological data to the SolidWorks model, such as roughness designations, bases, shape tolerances and surface locations, dimensional tolerances, the programmer always has direct access to them, which makes it easy to select the part based on the machine and select ensuring the specified quality of the tool part and cutting conditions. The part can be easily adapted to the needs of processing by, for example, eliminating redundant elements from the point of view of processing geometry elements or by recalculating the executive dimensions of the model in the middle of the tolerance field. In SolidWorks assembly mode, you can perform joint processing of several parts, program processing of a series of parts, or simply completely simulate all the real situation on the machine table — all the equipment, preparation of any complexity, and so on — to fully take into account the realities of processing at the very early stages creating a program

Year / Release Date: 2018
Version: 2019 SP0.1 build 2018/1220 (20-December-2018)
Developer: Geometric Technologies, Inc.
Developer site: http://www.camworks.com/
Digit capacity: 64bit
Interface language: Multilingual (Russian is present)
Tabletka: Present (TeAM SolidSQUAD-SSQ)
System requirements:
Operating System MS Windows Win7 SP1 + / Win8.1 / Win10 64-bit
SolidWorks Version 2018-2019
MS Access 2010-2019 32/64 bit
Graphics 1024x768 resolution with minimum 32768 colors
Disk Space 10GB free
Memory 1GB + RAM (2GB recommended)